Anyone who has built a big power C6 knows how annoying removing the factory rack is. It has hard-to-reach fittings that can only be loosened 1/4 turn at a time and the rack must be completely removed any time you need access to the front of the motor. The manual rack is lighter weight and allows more clearance around the front of the engine. The entire rack can be removed in minutes, with easily accessible fasteners. 

This kit is intended for use with the TRZ-Motorsports “C5-C6 Specific Length - Pinto Rack” for the C6 Corvette. We used their complete rack kit which includes the steering shaft, u-joints, and tie rods with various spacers. The steering shaft will need to be cut and fitted by you.  

The driver side mount bolts in the mounting ears that held the factory rack. The passenger side mount requires drilling three holes in the crossmember. The installation of these mounts takes roughly 30 minutes, on top of the time needed to install the rack. 

*This is intended for drag racing and is not intended to be used in a road race environment

See the Install Guide Here