Program to Control a Nitrous Solenoid:
- Uses Output 1 to Control the Nitrous Bottle Heater
- Uses Output 2 to Control the Nitrous Purge Solenoid
- Uses Output 3 to Control the Nitrous Solenoid
- Uses Input 1 to Arm the Nitrous System
- Uses Input 2 to Trigger the Purge Solenoid
- Uses Input 3 To Trigger the Nitrous Solenoid
- Nitrous will Turn ON above 70% TPS (Throttle Position Sensor) and 4000 RPM
- Nitrous will Turn OFF below 70% TPS (Throttle Position Sensor) or 4000 RPM
- The Green LED will light up when Valid CAN Messages are Received
If you do not see your preferred settings, Contact Us